a Presentation
a Location
a Contact
a Technical Support
a Maintenance tips
 
Press
Cutting-off machine
Face miller
Measuring table
Other
Die-making

 
Cutting-of machine » Cutting of machine CM-350

  • The CM-350 abrasive cutter, designed to cut aluminium profiles and plastic materials, is formed by:

  • Two horizontal clamps which can be positioned on the longitudinal axis of the profile and which allow it to be held as near to the cutting une as possible.

  • Rotation and positioning of the cutterquote is head at all angles to cut at 90º, 45º to the right and 45º to the left and the head can be slanted to cut at 45º to the left of the vertical axis..


  • Revolving graduated disc on rolling track. The disc is automatically positioned at 45º to the right and left, at 30º to the right and left and at 90º.


  • Total protection of disc according to accident prevention norms.


  • Robust construction which ensures its reliabihity and makes it a silent machine.
 

Prensa neumatica PV-3000

OPCIONES CM-350/N

- As welI as the detailed general characteristics, the horizontal manually-operated clamps can be replaced by pneumatic cylinders by installing two vertical pneumatic pistons. The profile holding cycle is automatic and fast to avoid loss of time.

- The cooling system is pneumatically-operated and is by means of adjustabte spray.

- The machines equipped with:

Blow gun to remove of chips.

 

OPCION CM-350/A

- Totally automatic version, equipped with hydrocontrol.

A maintenance unit formed by a regulating filter, lubricator and manometer

 

 CARACTERÍSTICAS TECNICAS
Three-phase 220/380 motor: 3 HP
One speed of disc-carrier shaft: 3.500 rpm
Maximum diameter of disc: 350 mm
Diameter of disc housing: 32 mm
Driving pivots: 2 de 10
Coolant tank capacity: 5 l
Pneumatic version: airpressure: 6-8 kg/cm2
Height of the table: 860 mm
Area of table: 600 x 580 mm
Main meassurements: 600 x 700 x 1.400 mm
Main meassurements with packing: 800 x 900 x 1.550 mm

Weight: 230 Kg

Packed weight: 260 Kg